How to Install And Configure Windows Nano Server 2016

How to Install And Configure Windows Nano Server 2016

In this blog post, I’ll show you How to Install And Configure Windows Nano Server 2016 using the Emergency Management Services (EMS).

The first thing you will have to do Is set the Administrator password by pressing F11 In the EMS screen

Once you set the password, enter your username and password and login to the EMS

How to Install And Configure Windows Nano Server 2016
How to Install And Configure Windows Nano Server 2016

By default, The server will use DHCP to obtain an IP address, To set a static IP address, go to Networking

How to Install And Configure Windows Nano Server 2016
How to Install And Configure Windows Nano Server 2016

Select the Network Adapter

Press F11

Change to disable, and set a static IP address

By Default, The firewall Is enabled and all ports are blocked except Remote PowerShell (WinRM)

In the example, below I’ll open the firewall to allow ICMP (Ping)

As you can see, ping Is blocked

To open the ICMP port, I click on Inbound Firewall Rules and select File and Printer Sharing (Echo Request- ICMPv4 -In)

Then I press F4 to enable the port

Done

Search








Bitnami